Select the search type
 
  • Site
  • Web
Search
+44 (0)1225 899550

Gas Inlet Valve (GIVT Type)

  • Compact and rugged design.
  • Built in swivel joint to allow movement of the hose during inflation.
  • Wide range of jet sizes available to allow flow to be matched to the size of the structures being inflated.
  • Designed to minimise ice formation in the system when used with the GIST Cylinder Valve.
  • Incorporates a non-return valve to prevent potential loss of pressure from the structure after inflation.
  • Snap fit hose for fast assembly without the need for tools.
  • Simple alignment of the jets from outside of the tube.

The Inlet Valves clamp into the fabric of the inflatable structure and allow efficient and controlled transfer of high-pressure gas through hoses from the Cylinder Valve into the structure. Leafield Marine are very happy to assist in the selection of appropriate jet sizes for your applications.

The GIVT inlet valve is available in a Nickel plated version shown above or Brass un-plated version and is available with either a Plated Steel or Stainless Steel connector nut.

A wide range of fittings is available to suit different applications. See Accessories and Service Tools below. 

Information Sheets

Installation Sheet

The above documents are in PDF format. To view these please use Adobe Reader.

Accessories and Service Tools

Saginaw cylinder valve to inlet valve connector link

Cylinder Valve to Inlet Valve Link

These links can be used on smaller life rafts to connect the cylinder valve directly to an Inlet Valve without a hose.

Stainless steel quick fit connector for the torsional gas inlet valve

Gas Inlet Valve Torsional with Stainless Steel Quick Fit Connector

This version of the GIVT has been designed for use with stainless steel hose fittings where prolonged exposure to salt water environment is likely, for example, RIB Self Righting Bags and Boat Rapid Inflation Systems.

Swivel Fittings for Inlet Valves

Additional fittings are available for use with the GIVT to suit various hose configurations. Please see Direct Inflation Systems for more information.

GIVT Factory Spanner

GIVT Factory Spanner

Allows the valve to be held from the outside of the tube when tightening.  It also allows the jets to be aligned.

Pressure Conversion Chart

copyright 2017 Leafield Marine Ltd
web design by intechnia